Asmedia 106x sata controller driver asus

#Asmedia 106x sata controller driver asus install#
#Asmedia 106x sata controller driver asus Pc#

Shutdown/reboot needed to get the drive back (same as when it's disconnected through eject via systray).ДЄfter shutdown/reboot Windows shuts down nicely but the PC stays powered on, needs forced power off (4secs power button press). Note that using /NOSMBSCAN (issue 0001921) doesnt prevent the problem from happening.Д«ehavior: Start SpeedFan, during initialization/scanning the drive connected to the ASMedia controller disappears (is disconnected, Safely Remove Hardware and Eject Media icon in systray -which very annoyingly always displays the option to eject the connected SSHD, although its an internal drive- also disappears). Seems to be a SMART problem, as using /NOSMARTSCAN /NOADVSMARTSCAN /NOSCSISCAN prevents it from happening. Sapphire HD 7750 passive cooled (Ultimate?) I am not sure if it creates any crash dumps.ДЄSRock 980DE3US3 BIOS v 1.60 (modded to include newer ASMedia ROMs) Windows log has only errors related to detection of unexpected system restart - no BSODs, no concrete errors. That's why I blame SMART access for crash as it was still active. But even then when I tried to start SpeedFan with such limited reading capabilities while HDD was connected to ASMedia 106x crash also occured in exactly the same way. I tried to disable 'debug mode', disable 'ISA access' and 'SMBus access' to sensors but with no effect - I got just temperature of AMD 1100T core and system HDD connected to AMD SB 7xx and nothing else. Reading parameters stops at accessing SMBus in SpeedFan's window - then Windows UI freezes and few seconds later PC restarts. It can properly read SMART status and temperature of any HDD connected to ASMedia 106x SATA3 controller.Д¬PUID HWMonitor also starts with no problems, but can't access temperature of any HDD connected to ASMedia 106x SATA3 controller. There is no problem to start AIDA64 v 4.70. It will continue starting as long as SpeeFan Window apperas and start reading parameters.ДЎ00% reproductivity. Nothing happens - PC works fine, SpeedFan don't get temperature of newly connected HDD.ДЎ2. Connect any SATA2/3 HDD to ASMedia SATA3 ports. Boot your PC, allow SpeedFan to start and finish all readsДЎ0. Start PC again without HDDs connected to ASMedia SATA3 portsД©. It will continue booting as long as SpeeFan Window apperas and start reading parameters.ДЁ.

For quickest results set it to autostart (as I do since last 5-6 years)ДҐ.

#Asmedia 106x sata controller driver asus install#

Install all drivers (don't try to install AMD chipset drivers newer than from package 13-12 - all later have messy SATA driver - at least messy for SB7xx chipsets).Д¤. Install Win7 ењ†4 SP1 and all Windows UpdatesДЈ. Whatever is connected to native AMD SB7xx SATA controller everything is fine.Дў. WD1002FAEX, WD30EZRX and WD20EADS SATA HDDs. SpeedFan v 4.49 (on BIOSes v 0.90, v 0.954, with drivers 2.0.8.1), SpeedFan v 4.50 (on all BIOSes, on both drivers version) ASMedia SATA drivers v 2.0.8.1 (on all BIOSes), v 2.0.9.1 (only on both 0.951 BIOSes) But on ASRock, whenever I start SpeedFan while something is connected to ASMedia my PC freezes and then simply reboots (despite autoreboot on error is disabled). Despite I rarely used this controller on Asus, I am sure that nothing bad happened there - I never got any crash.

On both mobos there is ASMedia ASM 106x SATA3 controller. Recently I downgraded my mobo from Asus Crosshair to ASRock 980DE3US3. 0002324: PC crashes when tries to access SMART data on ASMedia controller